Location: Sunshine Coast, Australia
Email: hello@primechem.com.au
Call: 0426-613-573
Schedule: Mon - Fri, 8:00 AM to 6:00 PM
$0.00 0

Cart

No products in the cart.

PRIME RESTORE
PRIME RESTORE - Image 2
PRIME RESTORE - Image 3
PRIME RESTORE - Image 4
PRIME RESTORE - Image 5
SKU: SKU5 Category:

PRIME RESTORE

$205.00

excl. GST

Powerful blend of phosphoric and nitric acids that removes efflorescence, grout haze, red dirt, and stubborn oil or tannin stains with ease.

PRIME RESTORE is a powerful blend of phosphoric and nitric acids, specially formulated for the effective removal of efflorescence, grout haze, red dirt, tannin, fat, and oil stains from a wide range of surfaces, including sandstone, granite, slate, terracotta, concrete, porcelain, pavers, and tiles. Unlike traditional acidic cleaners, PRIME RESTORE contains no harmful hydrochloric acid, eliminating the risk of rusting and surface damage.

Reviews

There are no reviews yet.

Be the first to review “PRIME RESTORE”

Your email address will not be published. Required fields are marked *

  1. Shake or stir the bottle/drum well before opening.
  2. Dilute approximately 300 ml of product per 9 litres of water.
    • Adjust concentration as needed depending on the level of contamination.
    • Do not concentrate mix more than 15 parts water to 1 part PRIME RESTORE as this may result in surface pitting or possible surface discolouration.
  3. Test the solution in an inconspicuous area before applying to the entire surface.
  4. Ensure the area is free of debris, mud, or any thick contaminants that may block the product’s effectiveness.
  5. Wet the area to be treated with plain water before applying the product.
  6. Saturate adjoining areas and sensitive elements with water to prevent collateral damage.
  7. Apply the diluted product evenly over the surface. A watering can might be a good tool for this step.
  8. Agitate with a soft broom, doodle pad, or similar tool.
  9. Allow the solution to act for 3-5 minutes, without letting it dry.
  10. Scrub the area with a brush and/or a rotary high-pressure wand as required.
  11. Rinse thoroughly with plenty of water and PRIME DEGREASER to neutralize the reaction.
    • For best results, use high-pressure water if available.
  12. Inspect the cleaned area.
  13. Repeat the process if necessary.
  14. Remove any excess water with a wet vacuum as required.
Download Safety Data Sheet
Before
After

Related products

Useful Links
Address
PO Box 385, Buddina, QLD 4575
Email
hello@primechem.com.au
Phone Numbers
0426-613-573
Follow Us

Delivery Area Restriction

Unfortunately, shipping is not available to your selected state or postcode.
Please contact our support team to discuss available options.
Contact Us

Need Delivery Outside Queensland?

We mostly ship within Queensland, but we’re happy to help arrange delivery elsewhere.
Just contact our friendly team at 0449 003 053 or hello@primechem.com.au
Contact Us